How to Clean a Showerhead -

How to Clean a Showerhead – How to clean limescale is one of the recurring questions in homes with hard water. Cleaning the shower head is much easier, cheaper, and more ecological than you think. The only thing you need is the following:

White vinegar.
A toothbrush (don’t go there to brush your teeth, of course).
A super-type container or a well-sealed bag.
Approximately 1 hour of your time.
Unscrew the shower head and disassemble its parts, careful not to damage them.
Soak them in 1 part white vinegar to 3 parts water.
Let the pieces soak for 20 – 30 minutes.
Take them out and rub the parts with the toothbrush and a little care to release the lime and dirt that has accumulated over time and has now softened.
If the lime is very embedded, carry out the same operation but boil the water with vinegar. Instead of leaving the pieces for half an hour, you only leave them for 10 minutes… and that’s it.

IS YOUR ARTICHOKE FIXED? – How to Clean a Showerhead

Don’t worry. Fill a sturdy plastic bag with white vinegar and check that it has no holes. Dip the artichoke in it and fix it with a rubber band. Let the vinegar sit overnight, and remove the bag the following day. Scrub the remains with the brush.

ONCE CLEAN

Let the (hot) water flow through the shower head and check the results. And remember that maintenance is vital so that the lime does not become embedded. Perform this operation at least once a month and avoid surprises.

ALSO

Apart from vinegar, other foods are used to clean. You can add a tablespoon of baking soda to the vinegar-water mixture or squeeze lemon if there isn’t a heavy limescale buildup. In this case, rinse the artichoke with undiluted lemon juice and leave it to act for at least an hour. Then, rub with the toothbrush to remove the lime that clogs the holes.

SHOWER FILTERS – How to Clean a Showerhead

As we all know that prevention is the key to success, you can consider installing a shower filter. These filters (different systems) are easily installed and have a life of 6 months and 1 year. This system allows you not only to avoid having to clean the shower head due to limescale buildup, but you can also enjoy healthier skin and hair. If you opt for this option, we advise you to do a good search before buying and become an expert in shower filters!

Steps to Clean the Shower Head

Step 1

Open the plastic cover and fill it halfway with the Blue Seal cleaning vinegar, place the body with vinegar in the shower, secure the cover with the plastic band, and let it rest for 1 hour; make sure that the body is well. Hold on, and don’t fall off.

Step 2

Once the time has passed, carefully remove the vinegar sleeve, then, separately in a small container, mix the toothpaste with the Blue Seal Homemade Baking Soda until it forms a not-very liquid paste that adheres to the shower.

Step 3

Followed with the toothbrush, take the paste, apply it over the shower, and let it dry for 15 minutes.

The Cleaning Vinegar helps easily remove the dirt impregnated in the shower, while the Bicarbonate and the toothpaste make the head shiny.

You can find Homemade Bicarbonate Seal Blue and Cleaning Vinegar Seal Blue in supermarkets nationwide and in our online store.

Also Read: air conditioner is not turning on

conclusion

I hereby want to describe that Finally, when the paste is dry, remove it with plenty of water and dry the shower with a towel or toilet paper; either one works; it is simply to appreciate the results better.